JL825A - HPE FlexNetwork 5140 48G POE+ 2SFP+ 2XGT EI Switch
Item No.
The HPE FlexNetwork 5140 EI Switch Series delivers scalability, high availability, and low TCO at the access layer of medium and large enterprise campus networks. The series offers enterprise-class QoS and security, Hewlett Packard Enterprise Intelligent Resilient Fabric (IRF) stacking, static layer 3 routing and RIP, convenient fixed 10GbE uplink ports, PoE+, ACLs, and IPv6, and delivers energy savings with Energy Efficient Ethernet.
Specifications:
| I/O ports and slots | 48 RJ-45 autosensing 10/100/1000 ports; Duplex: Ports 1-48 support 10BASE-T/100BASE-TX, 1000BASE-T (full only) 2 SFP+ fixed 10GbE ports 2 x 1/2.5/5/10GBASE-T |
| Additional ports and slots | 1 RJ-45 Serial Console Port |
| Memory and processor | 512 MB SDRAM, 256 MB flash |
| Mounting and enclosure | Mounts in an EIA standard 19-inch telco rack or equipment cabinet (HPE 5140 E Rack Mount Kit [R8M91A] sold separately) |
| Physical characteristics | |
| Dimensions | 17.32(w) x 12.6(d) x 1.72(h) in. (44 x 32 x 4.36 cm) (1U height) |
| Weight | 13.23 lb (6 kg) |
| Performance | |
| 1000 Mb latency | < 5 µs |
| 10 Gbps latency | < 3 µs |
| Throughput | 131 Mpps |
| Routing/switching capacity | 176 Gbps |
| Routing table size | 1024 entries |
| MAC address table size | 16,384 entries |
| IPv6 Ready Certified | |
| Environment | |
| Operating temperature | 23°F to 122°F (–5°C to 50°C) |
| Operating relative humidity | 10% to 90%, noncondensing |
| Non-operating/storage temperature | –40°F to 158°F (–40°C to 70°C) |
| Non-operating/storage relative humidity | 5% to 95%, noncondensing |
| Acoustic | Low-speed fan: 43.5 dB, High-speed fan: 52.8 dB; ISO 7779 |
| Electrical characteristics | |
| Frequency | 50/60 Hz |
| Maximum heat dissipation | 117.7/1467 BTU/hr (124/1547.77 kJ/hr) |
| AC voltage | 100 VAC–240 VAC |
| Maximum power rating | 430W |
| Idle power | 34.5W |
| PoE power | 370W PoE+ |
| Notes | Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. PoE power is the power supplied by the internal power supply. |
| Safety | UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; IEC 62368-1; CAN/CSA-C22.2 No. 60950-1; EN 62368-1/A11; FDA 21 CFR Subchapter J; RoHS Compliance |
| Emissions | FCC Part 15 Subpart Class A; ICES-003 Class A; VCCI-CISPR 32 Class A; EN 55032 Class A; AS/NZS CISPR 32 Class A; CISPR 24; EN 55024; EN 61000-3-2; EN 61000-3-3; ETSI EN 300 386; GB/T 9254; YD/T 993 |
|
Immunity Generic ESD |
EN 55024 EN 300 386 |
| Management | IMC—Intelligent Management Center; Smart MC, command-line interface; web browser; SNMP Manager |
Share this Product
